Control System, Gecko, in.ye-5, 115/230V, 4.0KW, P1, P2
About This Part
Control System, Gecko, in.ye-5, 115/230V, 4.0KW, P1, P2 — a genuine Gecko Alliance replacement part for spas and hot tubs. Part #0610-221126-728.
This is an authentic Gecko Alliance component, stocked and shipped by Sauna Company USA. Order genuine Gecko Alliance part #0610-221126-728 online with fast shipping, secure checkout, and expert support from our parts team.
- Manufacturer: Gecko Alliance
- Part Number: 0610-221126-728
- Category: Controls & Spa Paks › Spa Controls › Complete Spa Paks
- Availability: Regular Stock
Detailed Description
The Gecko 0610-221126-728 is a Gecko in.ye-5 V3 4kW Spa Control Box (120/240V) designed for residential, entry-to-mid-range spas. It manages up to 5 high-voltage components (pumps, blower, ozone) and features a 4kW heater, Wi-Fi compatibility, RGB light management, and self-diagnostic, tool-free installation, commonly used to replace older Y-series models.
Key Features and Technical Specifications:
- Heater: Integrated 4 kW, 2-inch heater (heat.wav).
- Capacity: Supports 5 configurable outputs (e.g., Pump 1, Pump 2, Blower/Circ Pump, Ozonator, Light).
- Voltage: 120/240V convertible (requires appropriate amperage configuration).
- Compatibility: Works with Gecko in.k200, in.k300, in.k450, in.k600, and In.Touch 2 Wi-Fi module.
- Features: In.Flo dry-run protection, in.t.cip smart heating, and AMP connectors for easy installation.
- Certifications: IPX5 rated.
This unit is a direct, upgraded replacement (V3) for older 0610-221046-355 models and is designed to be highly reliable, featuring solid-state water flow detection and flexible configuration options.
NOTE: in some configurations you will need a 9920-401346 option floating connector in order to connect a blower or a pump 4 to the pack. This is connection A0. See low level configurations in Quick Start Card below.
- Ships from the USA
- Secure checkout
- Lowest price guaranteed
Related Complete Spa Paks
Browse more: Complete Spa Paks · All Gecko Alliance parts
Technical Specifications
| Part Number | 0610-221126-728 |
| Brand | Spa Parts |
| Item Type | Part |
| Category | 0610-221126-728,Complete Spa Paks,Controls & Spa Paks,Gecko Alliance,Part #0610-221126-728,Spa Controls, |
| Shipping Method | Standard parcel |
| Availability | In Stock |
Contact us to confirm compatibility with your specific model before ordering.
Installation Overview
Control system installation — low-voltage signal wiring; typically DIY-friendly. Consult the included manual for model-specific diagrams.
- Power down the steam generator at the breaker before working with any wiring.
- Mount the control unit at the desired wall location (typically inside or adjacent to the steam room, at accessible height).
- Route the signal cable from the control to the generator junction box — keep away from high-voltage wiring.
- Connect the wires to the labeled terminals on both the control and the generator (typically color-coded or numbered).
- Secure all cable runs with clips or conduit as required by local code.
- Restore power and follow the pairing/commissioning sequence in the manual.
- Test all functions: heat, timer, aromatherapy (if equipped), and indicator lights.
Compatibility & System Requirements
This part is designed for use with:
- Spa Parts Products
Control compatibility: Steam generators have a specific control protocol. Mix-and-match between brands is not supported. Verify the exact control family (e.g., AirTempo vs. iSteamX) matches your generator.
Not sure if this fits your system? Contact us with your model number and we'll confirm before you order.
Frequently Asked Questions
Will this control work with my existing generator?
Controls are brand- and family-specific. An AirTempo control only works with AirTempo-compatible Mr.Steam generators; an iSteamX control requires an iSteamX-compatible unit. Verify your generator's model number against the compatibility list before ordering.
Can I install this control myself?
Most control installations involve low-voltage signal wiring only, which is generally considered DIY-friendly. However, if any line-voltage wiring must be moved or reconnected, a licensed electrician is required. Consult the enclosed installation manual.
What if my new control doesn't pair with the generator?
Follow the commissioning sequence in the manual exactly — it usually involves holding a button on the generator PCB while powering on the control. If pairing fails, confirm the firmware is compatible or contact the manufacturer's technical support.
Shipping & Delivery
Standard parcel shipping — ships within 1–2 business days via UPS or FedEx.
- Tracking number emailed when shipped.
- Estimated transit: 2–5 business days depending on destination.
- Expedited shipping options are available at checkout.
- Orders placed before 5pm ET on business days ship the same or next business day.
Questions about your order? Email info@saunacompanyusa.com or use our contact page.
Warranty & Returns Policy
Manufacturer Warranty: This part is covered by Spa Parts's standard manufacturer warranty against defects in materials and workmanship. Warranty duration and terms vary by part type — refer to the documentation included in the package or contact us for details.
Returns: Parts & accessories are non-returnable once ordered. This policy exists because installed or opened components cannot be resold as new. Please verify compatibility thoroughly before purchasing — we're here to help.
Defective items: If your part arrives damaged or defective, contact us within 48 hours of delivery. We will arrange a replacement at no charge with proof of the defect (photos or video).
For warranty claims, visit our Warranty Claims page.